Filter
Top Products
33
Special Features
Special Features
Light Metering
Light Metering
1Press or to select LIGHT
METER and press
or to select
one of the two settings shown below.
• Default setting is AUTO.
AUTO (No indication) :
Ideal for normal capturing, the
focus is set to the center portion
of the finder and the entire image
is metered.
: A small sphere in the center
portion of the finder is metered.
This mode is useful for capturing
back lit conditions, such as when
the subject is brightly lit.
2Press MENU to exit.
• Selected mode will appear on the
LCD Viewfinder. (See page 9.)
According to the recording condition and
purpose, set light metering to measure
exposure time.
Before you begin
Set the POWER Switch to
(MANUAL REC). (See page 16.)
Press MENU to display the MENU
screen.
POWER Switch
2MENU
Button
1Select Button
/ / /
REC MENU 2/3
LIGHT METER
EXIT : MENU
SET :
AUTO
3000.P30-33.p65 00/09/25, 10:4133