Filter
Top Products
60
For assistance, please call : 1-800-272-7033.
Before Requesting Service
If you have a problem with your Digital Camera, it may be something you can correct
yourself.
Check the list below for symptoms and corrections.
Possible Solution
• Battery is worn out. (p. 12)
• Make sure polarities are aligned properly. (p. 12)
• Battery is worn out. (p. 12)
• Auto shut off feature is on. Press SHUTTER, or set
POWER Switch to off, and then set to REC or
MANUAL REC. (pp. 15, 16)
• Memory card is not inserted. (pp. 7, 14)
• Make sure the POWER Switch is set to REC or
MANUAL REC. (pp. 15, 16)
• No memory. Delete some images before
capturing images. (p. 37)
• LCD Viewfinder is OFF. (p. 11)
• Auto shut off feature is on. Press SHUTTER, or set
POWER Switch to off, and then set to REC or
MANUAL REC. (pp. 15, 16)
• Make sure the LCD Viewfinder brightness
setting is adjusted properly. (p. 24)
• Make sure the focus mode is properly set.
(p. 30)
• The flash mode is set to
(OFF).
Change the flash mode. (p. 31)
• Memory Card is not inserted. (pp. 7, 14)
• There are no images on the Memory card.
(pp. 18~21)
• Set the POWER Switch to PLAY. (p. 16)
• Make sure all necessary connections are correct
and tight. (p. 29)
• Make sure the TV is set to video input mode.
(p. 29)
• Make sure all necessary connections are correct
and tight. (pp. 43, 52)
• Make sure the ipalm Driver is installed.
(pp. 41, 51)
Symptom
No power
Power shuts off automatically.
Cannot capture the image.
No Picture on the LCD
Viewfinder
LCD Viewfinder image is too
bright or dark.
Indication or image on the
LCD Viewfinder is not
focused.
Flash will not light.
Cannot playback.
No picture on the TV
(if connected).
Cannot transfer images on the
PC Connection.
Before Requesting Service
3000.P58-61.p65 00/09/25, 10:4560