Filter
Top Products
21
Basic Operation
Basic Operation
1Press MODE repeatedly to select
Motion (
) or Burst ( ) recording
mode.
2Press ZOOM TELE or WIDE to zoom
In and Out.
• Zoom magnification level is up to 2X.
3Press SHUTTER down halfway to lock
Auto Focus.
•“
” mark is displayed on the screen.
• Beep sounds twice. (See page 23.)
4Hold down the SHUTTER button the
rest of the way to actually capture the
image.
You can select
Motion Image capture
or
Burst Image capture as the REC
MODE.
Motion Image Rec Mode,
Burst Rec Mode
• If you select , you cannot record audio.
• The next image cannot be captured until
the previously captured image is no
longer displayed on the LCD Viewfinder.
• Power shuts off if there is no activity over
1 minute with Battery as a power source
to conserve power. Press SHUTTER to
turn power back on.
REC MODE
• A Motion Image with audio can be
captured for 12 seconds when
SHUTTER is pressed.
REC MODE
• A burst of up to 3 images with no
audio (one frame every 1 second)
can be captured while SHUTTER is
pressed.
• While the Digital Camera processes
the image, REC will flash on the LCD
Viewfinder and the captured image
will be displayed on the LCD
Viewfinder for a few seconds.
Note
Before you begin
Set the POWER Switch to (REC)
or
(MANUAL REC).
(See pages 15, 16.)
POWER Switch
1MODE Button
LCD Viewfinder
2ZOOM TELE/
WIDE Button
3, 4
SHUTTER
Capturing Images
Capturing Images
3000.p18-21.p65 00/09/25, 10:3921