Filter
Top Products
23
Recording Mode
To Cancel Blank Search Before
Completion
Press the [ ■ ] Button.
Digital Still Picture
• We recommend that you press the [STILL] Button
first at the position where you wish to record the still
picture so as to enter the Digital Still Picture Mode
and then press the [PHOTO SHOT] Button.
1 Set the Mode Dial
38
to Card Recording
Mode.
2 Press the [PHOTO SHOT] Button
35
.
• The [
PICTURE
] Indication lights up in red.
Selecting the quality of Photoshot
images
Set [CARD RECORDING MENU] >> [CARD] >>
[PICT QUALITY] >> a desired image quality.
13
38
Recording a Still Picture on a Card
(Photoshot)
Still pictures can be recorded on the Memory Card
from the Camcorder.
19
14 1513 16 17
35
Maximum number of still pictures
recordable on an SD Memory card
(optional)
PICTURE
QUALITY
FINE NORMAL ECONOMY
32 MB 220 440 880
64 MB 440 880 1 760
128 MB 880 1 760 3 520
256 MB 1 760 3 520 7 040
512 MB 3 520 7 040 14 080
1 GB 7 040 14 080 28 160
• These figures vary depending on the subject being
photographed.
RapidFire Consecutive Photoshot
• The [ ] Indication appears.
19
14 1513 16 17
When the [STILL] Button
13
is pressed, images
become still pictures. When the button is pressed
again, the Digital Still Picture Mode is canceled.
Progressive Photoshot
When the [
P
] Indication is displayed, Progressive
Photoshot Function works. You can record still
pictures with higher quality by using this function.
• The Progressive Photoshot Function may not be
activated depending on the function you use. (p. 54)
• To record still pictures with higher quality, we
recommend setting to the Card Recording Mode.
(To activate the Progressive Photoshot Function
regardless of the function you use)
• When you record onto the tape and the card
simultaneously, the Progressive Photoshot Function
is not activated.
The still pictures can be recorded on a Card at regular
intervals.
1 Set [CARD RECORDING MENU] >> [CARD]
>> [BURST MODE] >> [ON].
• When [ON] is selected, the still pictures can be
recorded in approximately 0.5 second intervals until
the [PHOTO SHOT] Button is released or 10 pictures
are recorded.
2 Press the [PHOTO SHOT] Button
35
.
35
• For other notes concerning this item, see page 55.