Filter
Top Products
32
Recording Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Wipe Mode and Mix Mode
Mix Mode:
While the moving image of a new scene fades in, the
still image of the last recorded scene gradually fades
out.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [WIPE] or [MIX].
• The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button
41
to start recording.
3 Press the Recording Start/Stop Button
41
to pause the recording.
• The last scene is stored in memory. The [WIPE]
or [MIX] Indication changes to [
WIPE
] or
[
MIX
].
4 Press the Recording Start/Stop Button
41
to restart the recording.
• The last image of the previous scene gradually
changes to the new scene.
• For other notes concerning this item, see page 57.
19
14 1513 16 17
41
Wipe Mode:
Like drawing a curtain, the still picture of the last
recorded scene gradually changes to the moving
image of a new scene.
Picture-in-Picture Mode
You can display a sub-screen (still picture) inside the
screen.
1 Set [TAPE RECORDING MENU] >>
[DIGITAL] >> [EFFECT1] >> [P-IN-P].
2 Aim the Camcorder at the scene you want
to capture and press the [P-IN-P] Button
20
to insert a small still picture.
• A small still picture is displayed in a normal picture.
• If the [P-IN-P] Button is pressed again, the small still
picture is cleared.
• For other notes concerning this item, see page 57.
19
14 1513 16 17
20