Filter
Top Products
35
Playback Mode
Continuous Index Search
If the [►► ] Button or the [◄◄ ] Button
56
is
pressed for 2 seconds or longer, search can be
continued at several-second intervals. (To cancel,
press the [►] Button
70
or the [■] Button
68
.)
Index Search Functions (Optional
Remote Control Only)
• If the Camcorder is switched from the Tape Playback
Mode to Tape Recording Mode or if the date and
time is set before the start of recording, the index
signal is not recorded.
1 Set [TAPE PLAYBACK MENU] >>
[PLAYBACK] >> [SEARCH] >> [PHOTO].
2 Press the [►►Ι ] Button or [Ι◄◄ ] Button
56
on the Remote Control.
• With each press of the corresponding button, still
pictures recorded in Photoshot Mode are searched.
1 Set [TAPE PLAYBACK MODE] >>
[PLAYBACK] >> [SEARCH] >> [SCENE].
2 Press the [►►Ι ] Button or [Ι◄◄ ] Button
56
on the Remote Control.
• When the corresponding button is pressed once,
the [S 1] Indication appears, and searching for the
subsequent scene marked with an index signal
starts. Each time the button is pressed after the
start of Scene Index Search, the indication changes,
from [S 2] to [S 9], and the beginning of the scene
corresponding to the selected number will be
searched.
• Up to 9 scene numbers can be selected.
• For other notes concerning this item, see page 58.
Playback Zoom Function (Optional
Remote Control Only)
A part of the image can be enlarged up to 10 times
during playback.
1 During playback, press the [P.B. ZOOM]
Button
72
on the Remote Control.
• The center of the image is enlarged by
approximately 2 times.
19
14 1513 16 17
56
56
68
56
70
56
72
54
54
Photoshot Index Search
Scene Index Search
This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 68.
To facilitate searching for desired scenes, this
Camcorder automatically records index signals during
recording, as explained in the following.
Photoshot Index Signal
These signals are automatically recorded when still
pictures on a card are recorded to a tape.
Scene Index Signal
Scene Index Signals are automatically recorded
when you start recording after inserting a Cassette.
• If [SCENE INDEX] of [RECORDING] Sub-Menu on
the [TAPE RECORDING MENU] is set to [2HOUR],
an index signal is recorded when recording is
restarted after an elapse of 2 hours or longer. If it
is set to [DAY], an index signal is recorded when
recording is restarted after the date has changed
since the last recording. (While the index signal is
being recorded, the [INDEX] Indication flashes for a
few seconds.)
This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 68.