Filter
Top Products
26
Recording Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
2 When the image is completely gone, press
the Recording Start/Stop Button
41
to start
recording.
3 Release the [FADE] Button
16
about
3 seconds after recording starts.
• The image reappears gradually.
41
Fade Out
1 Keep pressing the [FADE] Button
16
while
recording.
• The image fades out gradually.
3 Release the [FADE] Button
16
.
• The still picture cannot fade in or fade out.
Backlight Compensation Function
This prevents the subject from being recorded too
darkly when backlit. (Backlight is the light that shines
from behind the subject being recorded.)
1 Press the [BACK LIGHT] Button
10
.
• The [ ] Indication flashes and then is
displayed.
• The entire screen becomes brighter.
To Resume Normal Recording
Press the [BACK LIGHT] Button.
• For other notes concerning this item, see page 56.
16
41
10
2 When the image is completely gone, press
the Recording Start/Stop Button
41
to stop
recording.
2 Press the Recording Start/Stop Button
41
or [PHOTO SHOT] Button
35
to start
recording.
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] >> [CAMERA] >>
[EIS] >> [OFF].
• For other notes concerning this item, see page 56.
35
41
Fade In/Out Functions
Fade In
1 Keep pressing the [FADE] Button
16
during the Recording Pause Mode.
16
• The image fades out gradually.
Fade In brings out images and sounds gradually from a
black screen at the beginning of a scene.
Fade Out causes images and sounds to disappear
gradually, leaving a black screen at the end of a
scene.