Filter
Top Products
36
Playback Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Playing Back a Memory Card
It plays back files recorded on a Card.
1 Set the Mode Dial
38
to Picture Playback
Mode.
► : Starting the Slide Show
►► : Playing back the next picture
◄◄ : Playing back the previous picture
■ : Stop the Slide Show
: Pause the Slide Show
2 Start Playback.
38
To Change the Zoom Magnification
2 Change the magnifi cation by pressing the
[W] Button or [T] Button
60
on the Remote
Control.
To Change the Enlarging Area of an
Image
3 Press the Arrow Button (▲, ◄, ►, ▼)
54
on the Remote Control that points to the
area you want to enlarge.
To Cancel the Playback Zoom Function
Press the [P.B. ZOOM] Button
72
on the Remote
Control.
• For other notes concerning this item, see page 58.
Playback Digital Effect Functions
During playback, special digital effects can be added
to the recorded pictures. The same effects as those
of Digital Effects 1 and 2, which are used during
recording, are obtained.
1 Press the [►] Button
70
.
2 Press the [SELECT] Button
57
on the
Remote Control to select a desired digital
effect.
• When the [SELECT] Button is pressed
repeatedly, the digital effect selection changes.
• The same setting can be done using [EFFECT
SEL] Sub-Menu on the [TAPE PLAYBACK
MENU].
To suspend Playback Digital Effect
Temporarily
Press the [OFF/ON] Button
59
to suspend or
restart the digital effect. When the digital effect is
paused temporarily, the selected effect’s indication
flashes.
• The same operating can be done using [EFFECT
ON] Sub-Menu on the [TAPE PLAYBACK MENU].
To Cancel the Digital Effect
Press the [SELECT] Button
57
repeatedly on
the Remote Control and clear the digital effect
indication.
1 Press the [►] Button
70
.
2 Press the [SELECT] Button
57
on the
Remote Control and select [WIPE] or [MIX].
3 Press the [STORE] Button
58
at the
moment you want to save as a still picture.
• The [
WIPE
] or [
MIX
] Indication appears,
and the image is saved.
4 Press the [OFF/ON] Button 59 in the scene
in which you want to use the Wipe or Mix
effect.
• The scene changes as a result of the Wipe or
Mix effect.
• The Wipe Function and Mix Function can only
be accessed by using the Remote Control during
playback.
• If the [OFF/ON] Button
59
is pressed while Wipe or
Mix is carried out, the effect will stop temporarily at
that point. Pressing the [OFF/ON] Button
59
again
will bring back the effect.
60
57
59
70
70
57
59
58
• For other notes concerning this item, see page 58.
Wipe Mode and Mix Mode (Optional
Remote Control Only)
This feature is only available with Remote Control.
However it is not supplied. If you would like to order,
the parts number is LSSQ0411 as a replacement
parts. Please refer to page 68.