Filter
Top Products
Recording Mode
27
Maximum number of still pictures
recordable on an SD Memory card
(optional)
PICTURE QUALITY
(High) (Normal)
32 MB 220 440
64 MB 440 880
128 MB 880 1 760
256 MB 1 760 3 520
512 MB 3 520 7 040
1 GB 7 040 14 080
2 GB 14 080 28 160
• The numbers shown in the table are
approximations.
• These figures vary depending on the subject being
photographed.
Selecting the quality of Photoshot
images
1 Set [ BASIC] >> [ PICT.QUALITY] >>
[ (High Picture Quality)] or [ (Normal
Picture Quality)].
• You can also change the picture quality on [
ADVANCED] >> [
PICT. QUALITY] in the
Tape Recording Mode.
12:34:56AM
JAN 2 2006 100
1) Still picture size
2) Quality of still pictures
3) Number of recordable still pictures (When no
pictures can be recorded, the red light will
flash.)
On-screen display in the Card
Recording Mode
1)
2) 3)
Recording with a shutter operation
effect
You can add a shutter operation simulating sound.
1 Set [ ADVANCED] >> [ SHTR EFFECT]
>> [ON].
2 Set the Mode Dial to Card Recording
Mode.
• The [ CARD RECORDING MODE] is
displayed on the screen.
3 Press the [PHOTO SHOT] Button.
• The [ ] Indication lights up in red.
To record still pictures clearly
• When zooming in on the subject with a
magnification of 4× to 10× or higher, it is difficult
to reduce the slight hand shaking from holding
the Camcorder. We recommend decreasing the
zoom magnification and approaching the subject
when recording.
• When recording still pictures, hold the
Camcorder firmly with your hands and keep your
arms stationary at your side so as not to shake
the Camcorder.
• You can record stable pictures without hand
shaking by using a tripod.
Notes:
• Even if the [ SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
• When the color of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
• Photoshot Recording results in slightly inferior
image quality.
• For the number of still pictures to be recorded on a
card, refer to page 27.
• The sound cannot be recorded.
• While data is being recorded on a card, do not
operate the Mode Dial.
• When the Access Lamp is lit, do not insert or
remove a card.
• Another product may degrade or not play back data
recorded on this Camcorder.
• If set [
PICT. QUALITY] >> [ ], mosaic-pattern
noise may appear on a playback image depending
on the picture content.