Filter
Top Products
Recording Mode
33
Soft-Skin Mode
This enables you to record skin colors in a softer tone.
In order to get the best result, avoid background colors
similar to the skin color of the subject. Otherwise, this
may result in a softer background lacking in detail.
• Set to Tape/Card Recording Mode.
1 Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2 Move the Joystick Control [▼] until the
page with [ ] indication is displayed.
• To obtain the best effect, we recommend framing
the subject as shown above in the picture.
To Cancel the Soft-Skin Mode
Move the Joystick Control [◄] to select [ ]
again.
• The [SOFT SKIN MODE OFF] is displayed.
3 Move the Joystick Control [◄] to select
[ ].
• The [SOFT SKIN MODE ON] is displayed. The
[
] Indication flashes and then is displayed.
Notes:
• If set in a bright place, the screen may become
whitish for a while.
• The MagicPix Function is canceled when you
operate the [OFF/ON] Switch or the Mode Dial.
• In a dark place, the recorded picture is presented in
a time-lapse-like manner.
• Adjust the Focus manually.
• White Balance cannot be set.
• The Shutter Speed cannot be adjusted.
• The Scene Mode cannot be set.
• When recording with the MagicPix Function, it is
recommended that you use a tripod.
• The MagicPix Function makes the signal charging
time of CCD longer up to approx. 30× longer than
usual, so that dark scenes that are invisible to
the naked eyes can be recorded brightly. For this
reason, bright dots may be seen, but this is not a
malfunction.
• The Image Stabilizer Function does not work. In
this case, the [
] Indication flashes.
• The Backlight Compensation Function cannot be
changed.
2/4 NEXT
[One-Touch Navigation icon]
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
2/4 NEXT
Notes:
• If the background or anything else in the scene
has colors similar to the skin color, they will also be
smoothed.
• If the brightness is insufficient, the effect may not
be clear.
Wind Noise Reduction Function
This function reduces the sound of wind hitting the
microphone when recording.
• Set to Tape Recording Mode.
1 Set [ BASIC] >> [ WIND CUT] >> [ON].
• The [ ] Indication appears.
To Cancel the Wind Noise Reduction
Function
Set [ BASIC] >> [ WIND CUT] >> [OFF].
Notes:
• The default setting is [ON].
• Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When the
wind weakens, the stereo effect will be restored.)
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
• Black bars appear at the top and bottom of the
screen.
Cinema Function
This function is for recording a cinema-like image.
• Set to Tape Recording Mode.
1 Set [ BASIC] >> [ CINEMA] >> [ON].
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
To Cancel the Cinema Function
Set [ BASIC] >> [ CINEMA] >> [OFF].