Filter
Top Products
Recording Mode
31
Image Stabilizer Function
If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images
may not be stabilized.
• Set to Tape Recording Mode.
1 Set [ ADVANCED] >> [ EIS] >> [ON].
2 Press the Recording Start/Stop Button or
[PHOTO SHOT] Button to start recording.
To Cancel the Image Stabilizer
Function
Set [ ADVANCED] >> [ EIS] >> [OFF].
• The [
] Indication appears.
• When pushing the [W/T] Lever as far as it will go,
you can zoom from 1× to 30× in 3.3 seconds at the
maximum in the Recording Mode.
• The zoom speed varies according to the amount of
movement of the [W/T] Lever.
About the Variable Speed Zoom
Function
Notes:
• The larger the digital zoom magnification, the more
the image quality is degraded.
• When the Card Recording mode is used, the Digital
Zoom Function cannot be used.
• White Balance cannot be set in the Digital Zoom
range.
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
Notes:
• When the MagicPix Function is used, the image
stabilizer function does not work. If so, the [
]
indication flashes.
• When the Gain Up mode is set to ON, the image
stabilizer function does not work. If so, the [
]
indication flashes.
• Under fluorescent lighting, image brightness may
change or colors may not look natural.
• After-images may appear.
• When a tripod is used, we recommend that you
turn the Image Stabilizer off.
• In the following cases, the Image Stabilizer
Function may not work effectively.
- When the digital zoom is used
- When a conversion lens is used
- When recording is done in an extremely dark
place
- When the Camcorder is shaken greatly
- When you record a moving subject while tracking
it
Fade In/Out Functions
• Set to Tape Recording Mode.
• Fade In :
The image and audio gradually appear.
• Fade Out :
The image and audio gradually disappear.
1/4 NEXT
1 Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2 Move the Joystick Control [▼] until the
page with [ ] indication is displayed.
[One-Touch Navigation icon]
3 Move the Joystick Control [◄] to select
[ ].
• The [FADE ON] is displayed.
• The [
W] or [ B] Indication flashes and
then is displayed.
4 Press the Recording Start/Stop Button.