Filter
Top Products
21
Before Use
1) [PLAYBACK]
Playback Functions Sub-Menu
[SEARCH]
Index Search Mode (p. 37)
[12bit AUDIO]
Audio Selector (p. 44)
[AUDIO OUT]
Audio Output Mode (p. 64)
[USB FUNCTION]
USB Functions Mode (pp. 51, 54)
2) [DIGITAL]
Playback Digital Setup Sub-Menu
[EFFECT ON]
Digital Effect On/Off (p. 38)
[EFFECT SEL]
Digital Effect Selection (p. 38)
[TITLE IN] (For PV-GS12/PV-GS14/PV-GS15)
Adding a Title (p. 40)
3) [CARD] (For PV-GS12/PV-GS14/PV-GS15)
Card Setup Sub-Menu
[PICT QUALITY]
Picture Quality (p. 25)
[CREATE TITLE]
Title Creation (p. 40)
4) [RECORDING]
Recording Setup Sub-Menu
[REC SPEED]
Recording Speed Mode (p. 23)
[AUDIO REC]
Audio Recording Mode (p. 23)
5) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 60)
[DATE/TIME]
Date and Time Indication (p. 60)
[C.DISPLAY]
Counter Display Mode (p. 60)
[C.RESET]
Counter Reset (p. 71)
6) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi nder Adjustment (p. 19)
[EVF ON/AUTO]
Using the Viewfi nder (p. 19)
[SCENE INDEX]
Scene Index Mode (p. 37)
[WIND CUT]
Wind Noise Reduction (p. 29)
[ZOOM MIC]
Zoom Microphone (p. 27)
[CINEMA]
Cinema-like Format Recording (p. 29)
5) [DISPLAY]
Display Setup Sub-Menu
[DISPLAY]
Display Mode (p. 60)
[DATE/TIME]
Date and Time Indication (p. 60)
[C.DISPLAY]
Counter Display Mode (p. 60)
[C.RESET]
Counter Reset (p. 71)
• It resets the counter to zero. However, it cannot reset
the Time Code.
6) [LCD/EVF]
LCD/EVF Setup Sub-Menu
[LCD/EVF SET]
LCD and Viewfi nder Adjustment (p. 19)
[SELF REC]
Recording Yourself (p. 26)
[EVF ON/AUTO]
Using the Viewfi nder (p. 19)
7) [INITIAL]
Initial Setup Sub-Menu
[BLANK SEARCH]
Blank Search (p. 24)
[DEMO MODE]
Demonstration Mode
• If no operation takes place for approximately 10
minutes after the AC Adaptor is connected to the
Camcorder and the [OFF/ON] Switch is turned to
[ON] without inserting a Cassette or a Card, the
Camcorder is automatically set to Demonstration
Mode for introducing its functions. If any button is
pressed or operated, the Demonstration Mode is
canceled. The Demonstration Mode can be started
by setting [DEMO MODE] to [ON] and by exiting the
Menu. To terminate the Demonstration Mode, insert
a Cassette or set the [DEMO MODE] to [OFF].
[AV JACK]
AV Jack (pp. 13, 65)
[REMOTE]
Remote Control Mode (p. 15)
[BEEP SOUND]
Beep Sound (p. 61)
[CLOCK SET]
Date and Time Setting (p. 23)
[INITIAL SET]
Initial Setting Mode (p. 60)
[TAPE PLAYBACK MENU]
Tape Playback Menu
(PV-GS9)(PV-GS12/PV-GS14/PV-GS15)