Filter
Top Products
35
Playback Mode
Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately
after the recording.
1 Set the [OFF/ON] Switch
44
to [ON].
• The [POWER] Lamp
41
lights up.
2 Set the Mode Dial
40
to Tape Playback Mode.
3 Press the [
] Button
17
to rewind the
tape.
• Rewind the tape to the point where you want to
start playback.
• When the tape reaches the beginning, rewinding
stops automatically.
4 Press the [►] Button
15
to start playback.
• The [ ] Indication appears.
To Stop Playback
Press the [
] Button
16
.
Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever
26
to
display the [VOLUME] Indication. Push the [W/T]
Lever towards [T] to increase the volume or push
the [W/T] Lever towards [W] to decrease the
volume. The [VOLUME] indication disappears
immediately after adjustment is made.
To adjust the volume with the Remote Control,
press the [T] or [W] Button to display the [VOLUME]
Indication. Press the [T] Button to increase the
volume or press the [W] Button to decrease the
volume. The [VOLUME] indication disappears
immediately after adjustment is made.
• The sound volume cannot be adjusted using the
Remote Control in Playback Zoom Mode. (pp. 37-38)
Finding a Scene You Want to Play
Back
Cue/ Review Playback
If the [ ] Button
14
or [ ] Button
17
is
pressed during Playback, it turns to Cue Playback
A
or Review Playback
B
.
• If the Button is held continuously, it turns to Cue
Playback or Review Playback until you release it.
44
41
(PV-GS12/
PV-GS14/
PV-GS15)
(PV-GS9)
40
17
15
26
• For other notes concerning this item, see page 64.
17
14
A B
• If a cassette recorded with copyright protection
signal is played back, the picture is distorted by
mosaic-like patterns.
16