Filter
Top Products
61
Others
Notes and Hints
Concerning the Power Supply
• When the Camcorder has been used for a long time,
the Camera body becomes warm, but this is not a
malfunction.
• If the [CHARGE] Lamp does not light up although
the Battery is attached to the AC Adaptor, detach the
Battery and reattach it.
Inserting/Removing the Cassette
• In the case of using a previously recorded Cassette,
you can use the Blank Search Function (p. 24) to fi nd
the position where you want to continue recording.
• If a new Cassette is inserted, rewind to the beginning
of the tape before starting recording.
• When inserting the cassette, make sure it faces in
the right direction and then push it in until it stops.
• When the Cassette Holder is in action, do not touch
anything except the [PUSH] mark.
• When closing the Cassette Compartment Cover,
do not get anything caught in the cover, such as
a cable of an optional stereo microphone (For
PV-GS14/PV-GS15).
Alarm Sounds
When [BEEP SOUND] on the [INITIAL] Sub-Menu on
the [TAPE RECORDING MENU] is set to [ON],
confi rmation/alarm beeps are issued as follows.
1 Beep
• When you start recording
• When you switch the [OFF/ON] Switch from [OFF] to
[ON]
2 Beeps
• When you pause recording
2 Beeps 4 times
• If you perform a wrong operation before or during
recording.
Recording Check
• For Recording Check, the recording speed mode
(SP/LP) must be the same as the mode used for
the recording. If different, playback images will be
distorted.
Recording on a Card
• Even if the [SHTR EFFECT] is set to [ON], the
Shutter Effect cannot be recorded on the picture.
• When the color of the screen changes or blurs,
adjust the shutter speed manually to 1/60 or 1/100.
Photoshot
• Photoshot Recording results in slightly inferior image
quality.
RapidFire Consecutive Photoshot
• One more still picture may be recorded after you
release the [PHOTO SHOT] Button.
• The RapidFire Consecutive Photoshot and Title
Function cannot be used simultaneously.
NO CARD:
Card is not inserted.
NO DATA:
There are no recorded fi les in the card.
UNPLAYABLE CARD:
You are attempting to play back data which is not
compatible with this Camcorder.
CARD ERROR:
The Card is not compatible with this Camcorder.
COPY INHIBITED:
Because the medium is protected by a copy
guard, images cannot be recorded correctly.
INCORRECT OPERATION:
The Recording Start/Stop Button was pressed
without connecting the USB cable to the PC in
Picture Playback Mode.
CANNOT USE USB
CHANGE MODE:
The USB cable is connected to the Camcorder in
Card Recording Mode or Picture Playback Mode.
CANNOT OPERATE:
You are attempting to record pictures on a Card
while connecting the USB cable to the Camcorder
in Tape Recording/Playback Mode.
UNABLE TO WRITE
(MULTI RECORDING):
The [PHOTO SHOT] Button is pressed when you
are recording pictures on a Tape while setting the
Digital Effect [MULTI] of [EFFECT1].
UNABLE TO WRITE:
The Recording Start/Stop Button is pressed when
you are recording still pictures on the Card.
CASSETTE DOOR OPENED:
Close the Cassette Compartment Cover before
recording.
NO TITLE:
Titles are not recorded.
UNABLE TO WRITE
(WIDE MODE):
You are attempting to record pictures of S1 signal
(with aspect ratio 16:9) by pressing the [PHOTO
SHOT] Button.
FILE LOCKED:
You are attempting to erase protected fi les.
CARD LOCKED:
The write protection switch on the SD Memory
Card is set to [LOCK].
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial or turn
the Camcorder off in PC Mode while connecting
the USB cable to the Camcorder.