Filter
Top Products
12
Quick Guide
1 Charge the Battery. (l 18)
≥Connect the AC Cable to the AC Adaptor and plug it into the
AC Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the
charging process.)
≥The [POWER] Lamp and [CHARGE] Lamp light up, and
charging starts. When the [CHARGE] Lamp goes off, charging
is completed.
≥Since the Battery will not be charged when the DC Cable is
connected to the AC Adaptor, disconnect it.
2 Attach the Charged Battery to the Palmcorder. (l 18)
3 Insert the Cassette. (l 20)
≥Slide the [OPEN/EJECT]
1 Lever toward the front and pull
down to open the Cassette Compartment.
≥Insert the Cassette.
≥Press [PUSH CLOSE]
2 to load the Cassette.
≥Close the outside compartment Cover.
4 Start recording. (l 28)
≥Turn the Palmcorder on. (l 20)
≥Rotate the Switch
3 to [ON]. (The [CAMERA] Lamp lights up.)
≥Press the
4 Button. (Recording starts.)
≥Press the
4 Button again to pause the recording.
To View the Playback Picture
5 Switch to the VCR Mode, rewind the tape, and play
the tape back.
(l 42)
≥Set the
5 Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Press the
6 Button. (Rewind the tape.)
≥Press the
7 Button. (Playback starts.)
≥Press the
8 Button. (Playback stops.)
6 Turn the Palmcorder off. (l 20)
≥Set the 9 Switch to [OFF].
1
2
3
4
5, 6
5
9
CLOSE
PUSH
2
1
3
OPEN /
EJECT
CAMERA
VCR
CARD
PB
O
F
F
O
N
M
O
D
E
4
8
FADE
7
BACK
LIGHT
6
SEARCH
CAMERA
VCR
CARD
PB
O
F
F
O
N
M
O
D
E
PV-GS50P.book 12 ページ ２００３年２月１７日 月曜日 午後６時３０分