Filter
Top Products
87
ªManual Shutter Speed Adjustment
(l 36)
≥You may see vertical lines of light in the playback
image of a brightly shining subject or highly
reflective subject.
≥During Normal Playback, transition from one
scene to another may not appear smooth.
≥Because the color and brightness of the playback
image may become unstable, avoid recording
under fluorescent light, mercury light, or sodium
light.
≥If you are using either Gain up Mode, Program AE
Mode or MagicPix Function, you cannot adjust the
shutter speed. If the shutter speed is adjusted
manually, this setting will be cancelled.
ªManual Iris Adjustment (l 36)
≥Depending on zoom magnification, the iris value
may not be displayed correctly.
≥If you are using Program AE Mode you cannot
adjust the iris.
≥If you attempt to adjust the Shutter Speed after
setting the Iris, the value set for the Iris will be
cancelled.
ªWhite Balance (l 37)
In the following cases, you cannot change White
Balance:
≥When you set [EFFECT1] of [DIGITAL EFFECT]
Sub-Menu on the [CAMERA FUNCTIONS]
Main-Menu to [GAIN UP] or [EFFECT2] to [SEPIA]
or to [B/W].
≥When you set the Zoom to 10k or higher.
≥During Digital Still Picture Mode.
≥When you display a Menu.
≥When you use the MagicPix.
In the following cases, the [1] indication
flashes:
≥The flashing indicates that the previously adjusted
White Balance setting is still kept. This setting will
be kept until White Balance is adjusted again.
≥You may not be able to achieve correct White
Balance adjustment manually under weak
illumination.
ªDigital Effect Functions
(Camera Mode)
(l 39)
≥It is not possible to use [MULTI], [P-IN-P], [WIPE],
[MIX] or [TRAIL] of [EFFECT1] together with the
digital modes of [EFFECT2] on the
[DIGITAL EFFECT] Sub-Menu.
≥If you set [EFFECT1] on [DIGITAL EFFECT]
Sub-Menu to [GAIN UP], you need to adjust the
focus manually. However, you cannot adjust the
shutter speed and cannot select White Balance.
≥You cannot use Sports Mode, Portrait Mode or
Low Light Mode with Gain up Mode [GAIN UP].
≥If [EFFECT2] on the [DIGITAL EFFECT]
Sub-Menu is set to [B/W] or [SEPIA], the selected
White Balance Mode cannot be changed.
≥Setting the Cinema Mode cancels the Picture-in
Picture Mode and the Multi-Picture Mode.
In the following cases, using the [EFFECT1] on
the [DIGITAL EFFECT] Sub-Menu is not
possible.
≥When [PROGRESSIVE] is set to [ON]
≥When the MagicPix Mode is set
In the following cases, using the Digital Effect
Function is not possible.
≥Card Mode
≥Title In
Wipe Mode and Mix Mode (l 40)
If either one of the following operations is carried
out, stored images will be erased, and Wipe and Mix
Functions cannot be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
≥Switch the [TAPE/CARD/CARD MODE] Selector.
P-IN-P Mode (l 40)
≥If the Palmcorder power is turned off, the smaller
picture will disappear.
≥A title cannot be inserted into the smaller picture.
Multi-Picture Mode (l 41)
≥When [PROGRESSIVE] on the
[CAMERA SETUP] Sub-Menu is [ON],
Multi-Picture Mode cannot be used.
≥If the [MULTI] Button is pressed while
self-recording Mirror mode (l 29) is used, the still
picture is displayed from the upper right corner of
the screen, but, in reality, the picture is recorded
from the upper left corner as usual.
≥The quality of images recorded in Multi Mode
deteriorates slightly.
≥Multi Mode cannot be used in still picture mode.
≥The top and bottom of the Multi pictures will be cut
off slightly.
Others
PV-GS50P.book 87 ページ ２００３年２月１７日 月曜日 午後６時３０分