Filter
Top Products
88
ªListening to Playback Sound
Through Headphones
If you want to listen to the playback sound of a tape
through headphones, set [AV JACK] on the [AV IN/
OUT SETUP] Sub-Menu to [OUT/PHONES] and
connect the headphones to the [PHONES] Jack on
this Palmcorder. In this case, no sound (including
warning sounds and shutter sounds) will be
reproduced through the built-in speaker of the
Palmcorder. When the A/V Cable is inserted into the
AV Jack, the internal speaker works.
ªSelecting the Sound during
Playback
(l 42, 49)
You can select the sound by using the [AUDIO OUT]
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and
subsound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected
as the [AUDIO REC] setting, playback sound
becomes stereo sound regardless of whether
[12bit AUDIO] is set to [MIX] or to [AUDIO OUT].
ªPlayback Zoom Functions (l 45)
≥You cannot adjust volume with the Remote
Controller in Playback Zoom Mode.
≥If you turn off the Palmcorder, or if you switch from
VCR Mode to Camera Mode, Playback Zoom
Mode is automatically cancelled.
≥Even if Playback Zoom Functions are being used,
images that are output from the DV Terminal or
Digital Still Picture Terminal are not enlarged.
≥As you enlarge an image, the quality of image
suffers.
≥During the Playback Zoom Function, the Variable
Speed Search Function cannot be used with the
Remote Controller.
ªIndex Search Functions (l 46)
≥Index Search may not be possible at the beginning
of tape.
≥Because PhotoShot Index Signals are not
recorded on still pictures recorded in Continuous
PhotoShot Mode, the PhotoShot Index Search
Function cannot be used for these still pictures.
≥Scene Index Search may not function properly if
the interval between 2 scene index signals is
shorter than 1 minute.
≥For the still pictures taken in the Continuous
PhotoShot Mode or Digital Still Picture Mode,
PhotoShot index signals are not recorded.
ªPlayback Digital Effect Functions
(l 47)
≥Revised signals of images to which digital effects
are added during playback cannot be output from
the DV Terminal or Digital Still Picture Terminal.
≥You cannot use the Wipe Function or Mix Function
while playing back the non-recorded portion of
tape.
Multi-Picture Mode (VCR Mode) (l 48)
≥The quality of Multi images deteriorates slightly.
≥Playback multi-mode screens cannot be output
through DV Terminal or Digital Still Picture
Terminal.
≥If there is input from the DV Terminal, a multi
screen cannot be created.
≥When signals are input from S-Video Input/Output
Jack or Audio-Video Input/Output Jack, a multi
screen cannot be re-displayed.
≥Signals input from S-Video Input/Output Jack or
Audio-Video Input/Output Jack cannot be
displayed on a multi screen.
≥If you switch the Palmcorder from the Index
Multi-Picture Mode over to the Camera Mode, the
setting of [SCAN MODE] on the
[MULTI-PICTURES] Sub-Menu of the
[CAMERA FUNCTIONS] Main-Menu is
automatically set to [STROBE].
ªAudio Dubbing (l 50)
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be
dubbed.
≥If a tape has a non-recorded portion when the tape
is dubbed, images and sounds may be disturbed
when this portion of the tape is played back.
≥If you set the tape counter back to 0 at the position
where you want to stop Audio Dubbing so as to
make it possible to use the Memory Stop Function
(l 96), Audio Dubbing is terminated automatically
when the tape reaches this position.
≥In the case of importing data recorded with Audio
Dubbing to a Computer using the Computer’s
software program, only the original sound (ST1)
may be imported, depending on the software
program.
Microphone Jack
When audio dubbing is carried out through an
external microphone or audio equipment, connect it
to the [MIC] Jack. In this case, the built-in
microphone of the Palmcorder will be turned off.
PV-GS50P.book 88 ページ ２００３年２月１７日 月曜日 午後６時３０分