Filter
Top Products
90
≥The following functions are disabled.
≥Self-timer (l 30)
≥Zoom Microphone Function (l 31)
≥Digital Zoom (l 31)
≥Fade In/Out Function (l 32)
≥Digital Effect Functions (l 39)
≥Title In/Creation (l 61)
≥Even if the [CINEMA] is set to [ON], the black bars
cannot be recorded on top and bottom of the
picture.
≥The sound is recorded in monaural, that is, mixed
[L] and [R] of the stereo sound.
ªRecording to a Card from other
equipment
(l 54)
If you set the [TAPE/CARD/CARD MODE] Selector
to [CARD], you can use the Card PhotoShot
Function for externally input signals. (Not during
recording.)
≥Black streaks may appear at the four edges of the
image.
≥When the [PHOTO SHOT] Button is pressed, the
image may seem to move backward momentarily,
but this does not affect the recording.
≥If the [VOICE] Indication is displayed, recording to
a Card is not possible.
≥While recording with analog input, a Card
PhotoShot Function cannot be used.
ªCard Playback (l 56)
≥If a blank (nothing recorded) Card is played, the
screen becomes white and the [NO PICTURE],
[NO MPEG4 DATA] or [NO VOICE DATA]
Indication appears depending on the mode
selected.
≥If you attempt to play back if file recorded in a
different format or if file data is defective, the [k]
Indication and the [CARD ERROR] Indication
could appear as a warning.
≥When the pictures recorded by another
Palmcorder are played back with this Palmcorder,
the size of the pictures may be different from the
recorded size.
≥This Palmcorder can also play back the
Mega-Pixel still pictures up to 2560k1920 size
recorded with the other equipment. However it
takes longer than usual time, and the picture may
not be playable.
≥When playing back a nonstandardized file, the
Folder-File Number may not be displayed.
≥When playing back the MPEG4 moving picture
with fast moving subject or zooming operation, the
image seem to stop momentarily, or a mosaic like
pattern may appear. This is not a malfunction.
≥MPEG4 data or Voice data will not be output from
DV Terminal.
≥MPEG4 data cannot perform Cue/Review
Playback, Slow Motion Playback (forward direction
and reverse direction), Still Advance Playback
(forward direction and reverse direction) or Jog
Playback.
≥During automatic copying of tape pictures onto a
card, the remaining number of pictures that can
still be recorded on the Card is displayed. When it
becomes [0], the tape is set to the Recording
Pause Mode.
≥For the MPEG4 moving pictures recorded on a
camera other than this camera, “k” may be
displayed when they are played back. If the [1]
Button is pressed in this case, “!” will be
displayed for a few seconds and the next image
will be displayed.
≥For the still images recorded on the camera other
this camera, the mega-pixel image size may be
displayed.
≥If an MPEG4 motion picture is played continuously
for a long time, the playback may stop in the
midway and the video camera may freeze while a
still picture is being displayed. If this happens,
press the [RESET] button.
≥When performing Cue or Review Playback of
voice data, the Playback elapsed time may not
correspond to the actual recording time of the
sound.
≥When playing back an MPEG4 or voice data
recorded by other equipment, a part of the
playback elapsed time may be indicated as [--].
ªVoice Power Save (l 24)
≥Voice Power Save Function automatically shuts off
the monitor to reduce the power consumption
when no operation is being performed in the Voice
Recording Mode. When [VOICE POWER SAVE]
on the [OTHER FUNCTIONS1] Menu is set to
[ON], the power save function is activated, and the
screen turns off in a few seconds after operations,
such as play or recording, are performed.
≥The Voice Power Saving Function is cancelled
when any operation is performed.
≥Do not forget to turn off the power.
PV-GS50P.book 90 ページ ２００３年２月１７日 月曜日 午後６時３０分