Filter
Top Products
39
With a PC
Using Camcorder with a PC
An image stored on the DV Cassette or Memory
Card can be transferred to your personal
computer.
Software Installation (For Windows)
1 Turn on the personal computer and start up
Windows.
2 Insert the CD-ROM into the personal
computer’s CD-ROM drive.
• The [Setup Menu] screen appears.
3 Select the software to be installed from
[Setup Menu].
USB Driver (pp. 39~40) :
The USB driver to be installed is the dedicated
Mass Storage Driver for Windows 98SE.
Video Stream Driver (pp. 42~43) :
If the Camcorder is connected to your personal
computer, you can send video from the Camcorder
to the other parties via a network or by the Internet.
ArcSoft Software (pp. 46~47) :
PhotoImpression 4 and PhotoBase 4 (Windows) /
PhotoBase2 (Mac) are included.
4 Follow the instructions on the computer
screen until the installation is complete.
• Setup window will disappear when the
installation is complete.
With a PC
• If a window does not appear automatically, click the
“Start” Button on your desktop and then click “Run”.
When the “Run” Box is open, type in “D:\InstMenu.
exe” and click “OK”. (“D” applies when the CD-ROM
drive is drive D.)
• Despite having the Operating environment indicated,
it may not be possible to use the program with some
types of personal computers.
• A CD-ROM drive is required to install this driver.
• When you connect to an USB 2.0 interface
board, use a certified board with the USB 2.0
(FULL-SPEED USB) logo.
Using the USB Driver
Operating environment
Please install USB Driver first before connecting the
Camcorder to your personal computer with the USB
Cable only if you have Windows 98SE OS.
• If your computer has Windows Me/2000/XP, the
USB Driver is not required to be installed.
1 Turn on the personal computer and start up
Windows.
2 Insert the CD-ROM into the personal
computer’s CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
Installing the USB Driver (For Windows
98SE Only) For Using the Built-in SD
Driver Feature
For Windows
OS:
IBM PC/AT compatible personal computer with
preinstalled;
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium ll/Celeron 300 MHz or higher
(including compatible CPU)
RAM:
32 MB or more (64 MB or more recommended)
Free hard disk space:
At least 30 MB or more
Interface:
USB 1.1 or more
• For Windows Me/2000/XP users, the USB
equipment operates with the driver installed as
standard in OS.
For Macintosh
OS:
Mac OS X v 10.1 – X v 10.3
CPU:
iMac, iBook or Power Book G4, Power Mac G4 or
Power Mac G5
RAM:
64 MB or more
• The USB equipment operates with the driver
installed as standard in OS.
3 Click the [USB Driver].
• The set up program starts running.