Filter
Top Products
13
■ Installations (WV-CW484F)
● Using a Junction Box
Secure the provided camera attachment to
the two gang junction box built in a wall or
ceiling.
<Mounting hole pattern>
46 mm
Junction box
Camera attachment (provided)
83.5 mm
Screws for the camera attachment (Locally procured)
● Using Mounting Bracket WV-Q114 (Option)
• Secure the optional camera mounting bracket to wall or ceiling, and fix the provided cam-
era attachment to the mounting bracket with the screws for the mounting bracket. (Refer to
the following figures.)
Verify the camera attachment and mounting bracket are mounted firmly after screwing
them.
• When routing cables sideway or through
the wall/ceiling, the mounting bracket is
used.
• When routing cables sideway, open the
sideway cable exit unscrewing the lid by
use of a hexagon wrench. Screw the
detached lid to the cable access hole on
the bottom of the bracket.
• Make sure that either of the arrow marks
faces upward.
85 mm
Bracket centre
Drain slit*
Screws for the mounting bracket
* For wall mounting, do not face
the sideway cable exits upward.
51 mm
Sideway cable exit
85 mm
<Mounting hole pattern>
TOP
TOP
TOP
Cable access hole
Mounting
bracket