Filter
Top Products
44
Specifications
<WV-CW484F General specifications>
Power source and power
consumption: 24 V AC 50 Hz, 4.1 W (Without heater), 11 W (With heater),
12 V DC 50 Hz, 340 mA (Without heater), 470 mA (With heater)*
Ambient temperature: –10°C to +50°C
–30°C to +50°C**
Ambient humidity: 90 % or less
Water resistance: IEC60529 (IP66, Against ingress of water with harmful effects
powerful jetting)*** (Camera unit)
Dimensions: ø154 mm (W) x 141.2 mm (H) (excluding connectors/terminals)
Weight: Camera: 1.3 kg
Camera attachment: 100 g
<WV-CW480S General specifications>
Power source and power
consumption: 220 V to 240 V AC 50 Hz, 7 W (Without heater),
13 W (With heater)
Ambient temperature: –10°C to +50°C
–30°C to +50°C**
Ambient humidity: 90 % or less
Water resistance: IEC60529 (IP66, Against ingress of water with harmful effects
powerful jetting)*** (Camera unit)
Dimensions: ø160 mm (W) x 161.7 mm (H) (excluding connectors/terminals)
Weight: Camera: 1.5 kg
Camera attachment: 80 g
Mounting bracket: 550 g
* Heater Unit WV-CW4H (option) is not available with 12 V DC power supply.
** With Heater Unit WV-CW4H (option)
*** Applicable only when the installation and waterproof process are done properly.
Camera
Image sensor: 1/3 inch interline transfer CCD
Effective pixels: 752 (H) x 582 (V)
Scanning area: 4.8 (H) x 3.6 (V) mm
Scanning system: 2 : 1 interlace scan
Scanning lines: 625 lines
Scanning frequency: Horizontal: 15.625 kHz
Vertical: 50.00 Hz
Resolution: Horizontal: 480 TV lines (C/L Normal), 540 TV lines typ., 520 TV
lines min. (C/L High), 570 TV lines (B/W)
Vertical: 400 TV lines min. (Centre)
Video output: 1.0 V[P-P] PAL composite 75 Ω/BNC connector
Signal-to-noise ratio: 50 dB (Equivalent to AGC Off, weight On)
Dynamic range: 54 dB typ