Filter
Top Products
29
Setting Procedures
First, select a language for menu display and camera ID display.
Language Setup (LANGUAGE
SETUP)
1. Select LANGUAGE on the top menu and
press the [SET] button.
→ The LANGUAGE SETUP menu opens.
2. Select a language. The default setting is
English.
Available languages: ENGLISH, FRANÇAIS,
ESPAÑOL, DEUTSCH, ITALIANO, êìëëäàâ, CHINESE, JAPANESE
3. Select SET on the menu and press the [SET] button.
1. Camera Identification Setting (CAMERA ID)
Assign a name to the camera using up to 16 characters to display it overlaying on the camera
picture in the selected position.
Note: If you change the language selection after
the assignment of camera ID, it will be
erased.
1. On the CAMERA SETUP menu, select ON↓ or
OFF↓ for CAMERA ID and press the [SET]
button.
ON↓: Displays entered camera ID.
OFF↓: Does not display the ID.
→ The CAMERA ID menu opens.
2. Select a character from the character area
and press the [SET] button.
→ The selected characters are displayed in
the editing area.
3. Repeat these procedures until all characters
are entered.
• To enter a blank space, select SPACE and
press the [SET] button.
• To replace a specific character in the editing
area:
1. Move the cursor to the editing area and
then move the pointer to the character to
be replaced pressing the [LEFT] and
[RIGHT] buttons.
2. Move the cursor to a candidate character
in the character area and press the [SET]
button.
**CAMERA SETUP** 1/2
CAMERA ID OFF
ALC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
↵↵
↵
↵
CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$
SPACE POSI
RET TOP END RESET
................
Character
Cursor
Pointer
Character
Area
Command
Editing
Area
FLOOR 1
Highlighted
**LANGUAGE SETUP**
LANGUAGE ENGLISH
SET
RET TOP END