Filter
Top Products
• Though the "Alarm log list" displays up to 100 alarm logs,
only 60 pictures can be stored at the maximum.
• Depending on the traffic of the network, a drop frame may
occur while monitoring alarm pictures. If this occurs, click
the [B] button or the [A] button to monitor each frame.
• Display the saved still pictures (JPEG) using the web
browser. Some image-editing software cannot open or
display the saved still pictures.
! Important
48
DETECTING MOTION IN THE MONITORED AREA
Viewing the Picture Stored in the Camera
Check the picture stored in the camera when the alarm occurred. This operation can be made on the "Alarm log list"
page. You can browse the saved pictures after the alarm has been reset.
Click the [Alarm log list] button.
STEP1
Begin the operation from the "Top Menu" page. Refer to page 24
and 25 to display the "Top Menu" page.
The "Alarm log list" page appears.
Screenshot 2
Screenshot 1
Click the desired log from the alarm log list on
the left side.
The picture (JPEG) of the selected log appears
on the right side. (Only if the selected picture is
remaining.)
To view the previous or next picture
automatically
Operate the “Control” buttons.
[B] button: Displays the next picture automati-
cally.
[A] button: Displays the previous picture auto-
matically.
[y] button: Stops displaying the picture auto-
matically.
[d] button: Displays the last picture.
[s] button: Displays the first picture.
JPEG
n (current frame number)/nn (total frame num-
ber) appears in the box surrounded by [B] and
[A] buttons.
[B] button: Displays the next frame.
[A] button: Displays the previous frame.
Image Size
Click one of the buttons (x1.0 / x1.5 / x2.0) to
select the desired image size.
To return to the current camera picture, click the
"Control" button.
STEP3
STEP2