Panasonic WV-NM100 Digital Camera User Manual


 
63
The "System" page appears.
Screenshot 3
Set the items on the "System" page.
For details about the items, refer below.
Click the [SET] button after completing the set-
ting.
STEP4
STEP3
Setting items
System
"Time adjustment"
Select a standard for the time adjustment.
Manual setup: Adjust the time manually.
Synchronization with NTP server: Time is adjust-
ed automatically based on the NTP server.
"Time setup (year-month-day hour:min:sec)"
Enter year, month, date, hour, minute, and second if
"Manual setup" is selected for "Time adjustment".
Year: Enter 4 digits.
Month and day: Enter 2 digits each.
Hour, minute and second: Enter 2 digits each, and
divide by colon (:).
"NTP server address"
Enter the address of the NTP server if
"Synchronization with NTP server" is selected for
"Time adjustment".
"NTP port"
Enter the port number of the NTP server.
"Synchronization interval"
Enter “1” to “24” hours for the interval time to access
to the NTP server for synchronization.
"Time zone"
If using the NTP server, select the time zone accord-
ing to the location where the camera is installed.
"Daylight saving (Summer time)"
When you select “ON”, the currently set time minus
one hour will be displayed. When you select “OFF”
after “ON” has been selected, one hour will be
added to the currently displayed time.
"Time display"
Select "12hour" or "24hour" for time display.
"Time display pattern"
Select the time display pattern.
"Camera name"
Enter a name for the camera. The entered camera
name will be displayed when the reload button of the
browser is pressed or when the browser starts up
the next time.
Characters for "Camera name": Up to 32 characters
"Power / Link / Access LED"
Click the "ON" radio button to use the LED as status
display.
Click the "OFF" radio button to turn off the LED all
the time.