Filter
Top Products
Advanced setting
[Zoom with auto track]
Select the tracking zoom control from the following.
Off: Zoom control is not performed.
On(Continuous): Zoom control is performed.
Default: On(Continuous)
[Object size]
Select an object size from the following.
Small(1/4 of the image): The tracking target is enlarged to about 1/4 the size (lengthwise) of the monitor
screen.
Middle(1/2 of the image): The tracking target is enlarged to about 1/2 the size (lengthwise) of the monitor
screen.
Large(3/4 of the image): The tracking target is enlarged to about 3/4 the size (lengthwise) of the monitor
screen.
Default: Small(1/4 of the image)
Note
• The sizes described here are only a guide. Depending on the environment conditions and the tracking
conditions the displayed size may be different from the expected size.
• Increasing the display size of the tracking target reduces the tracking capabilities.
[Sensitivity]
Select the tracking sensitivity from the following.
High/Middle/Low
Default: Middle
Note
• Reducing the sensitivity can help reduce false detections such as when a tree is swaying, but it will
also reduce the tracking capabilities. On the other hand, increasing the sensitivity increases the tracking
capabilities but also increases false detections. Match the settings according to where the camera is
used.
[Auto track duration time]
Select the time that tracking will be forced to stop from after it started from the following.
Off(Unlimited)/10s/20s/30s/40s/50s/1min/2min/3min/5min/10min
Default: Off(Unlimited)
Note
• The camera will stop in the position it is at when the auto track duration time expires. To return to auto
mode, set the self return, and after tracking is finished, the self return time is counted and the camera
returns to auto mode.
[Lost object search]
Select the operations to be performed when the tracking loses the target from the following.
Off: Tracking stops at the position that it lost the target.
On(w/o zoom-out): If the target is lost, tracking starts looking for new movement and if it finds movement it
continues auto tracking.
On(w/zoom-out): If the target is lost, the camera zooms out and tracking starts looking for new movement, if
it finds movement it continues auto tracking.
Default: On(w/zoom-out)
Operating Instructions 123
11 Configure the settings relating to images and audio [Image/Audio]