Panasonic WV-SW170 Security Camera User Manual


 
On: All the indicators will light in accordance with the status.
On(Access): Only the live indicator will light when images are viewed.
Off: All the indicators will light off.
WIRELESS button (WPS indicator)
SW174W
SW174W
On: The indicator will light in accordance with the WPS operation status.
On(Access): The indicator will light during start up for the WPS and light off during normal use.
Off: The indicator will light during start up for the WPS and light off during normal use.
Default: On
Note
Link indicator (orange): This indicator will light when communication with the connected device is
available.
Access indicator (green): This indicator will light when accessing a network.
Live indicator (Red/Orange/Green): The live indicator will light or blink as follows depending on the
camera status.
Operation status
Indicator status
When the power is turned on Before the network
connection is established
Blinks orange
When the network
connection is established
Blinks orange ® Blinks green
® Lights green
During standby or connection (Cable is not connected.) Lights orange
During standby or connection (Cable is connected.) Lights green
During the upgrade process Blinks orange
During the initialization
Blinks orange ® Lights off
Port forwarding error caused by the UPnP function Blinks orange (in 2 seconds
intervals (on for 1 second / off
for 1 second))
Trouble happening on the camera Blinks red
Failure in writing data on the SDHC/SD memory card
*1
Lights red
WIRELESS button (Red/Orange/Green)
SW174W
SW174W
: The WIRELESS button will light or blink as follows
depending on the wireless status.
Operation status
Indicator status
WPS is not configured Lights off
WPS is starting up Blinks orange
WPS settings succeeded (WPS defined) Lights green
WPS settings failed Blinks red for about 10
seconds ® Lights off
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
:
The “Indicator” settings do not affect the FUNCTION button indicator status (on or off). Refer to the
installation guide for further information about the FUNCTION button.
56 Operating Instructions
10 Configure the basic settings of the camera [Basic]