Filter
Top Products
Note
• This function is also useful to automatically set the camera in a specific mode when the power of the
camera is turned on.
• The self return function works even when the setup menu is displayed.
[Self return time]
Select a waiting time (amount of time until the camera starts the selected operation after the end of the manual
operations) from the following.
10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min
• Default: 1min
[Image hold]
Select “On” or “Off” to determine whether or not to hold the still image on the screen (that is displayed at the
last moment before the camera started to move to a preset position) until the camera has moved to the preset
position.
• On: A still image will be held on the screen until the camera has moved to the preset position.
• Off: Images from the camera will be displayed even when the camera is moving to the preset position.
• Default: Off
[Upside-down]
SW396
SW396
SC386
SC386
Select “On” or “Off” to determine whether or not to turn the image upside-down.
• On: The image is turned upside-down.
• Off: The image is not turned upside-down.
• Default: Off
IMPORTANT
• Only use the upside-down function to check the image before installing the camera. Set this function
to “Off” after installing the camera.
[Upside-down]
SW395
SW395
SC385
SC385
Select “On (desktop)” or “Off (ceiling)” to determine how the camera is to be installed.
• On (desktop): Select this when the camera is to be installed with the dome side up.
• Off (ceiling): Select this when the camera is to be installed with the dome side down.
• Default: Off (ceiling)
[Extra optical zoom]/[Extra zoom]
Select the extra optical zoom or extra zoom setting from the following.
•
SW395
SW395
SC385
SC385
SC384
SC384
On (Max X36): Images can be zoomed in on with the optical zoom (1x - 18x) and the extra optical zoom
(higher zoom factors, up to 36x).
Off (Max X18): Does not use the extra optical zoom.
Default: On (Max X36)
•
SW396
SW396
SC386
SC386
On (Max X72): Images can be zoomed in on with the optical zoom (1x - 36x) and the extra optical zoom
(higher zoom factors, up to 72x).
Off (Max X36): Does not use the extra optical zoom.
Default: On (Max X72)
•
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
On (Max X2): Images can be zoomed in on with the extra zoom (1x - 2x).
Off: Does not use the extra zoom.
Default: On (Max X2)
Operating Instructions 95
11 Configure the settings relating to images and audio [Image/Audio]