Filter
Top Products
C1696M-A (7/08) 25
USING SHORTCUT CONTROLS FOR PTZ OPERATIONS
PAN TO ZERO
To pan the camera back to its zero position:
1. Right-click the video pane to display the shortcut menu.
2. Select Operations.
3. Select “Pan to Zero.” The camera is repositioned at its zero position. This position is determined by the position of the camera at
installation.
.
Figure 19. Pan to Zero
ROTATE THE CAMERA
To rotate the camera 180 degrees:
1. Right click in the video pane to display the shortcut menu.
2. Select Operations.
3. Select Rotate 180 Degrees.
USING PATTERNS, PRESETS, AND SCANS
The DVR5100 allows you to activate patterns, presets, and scans, which can be activated automatically or manually from the DVR5100. Patterns
and presets must be programmed by the system administrator before they can be executed.
PATTERNS
A pattern is a user-defined, viewable camera path with a beginning and end. The number and duration of patterns varies with different
positioning systems. Refer to documentation for your cameras to determine the number of patterns that may be configured.
Programming a Pattern
To program a PTZ pattern using an on-screen shortcut menu:
1. While in live view mode, right-click in a video pane that is displaying video from a camera with PTZ capabilities. A shortcut menu appears.
2. Click Pattern > Record Pattern > Modify Pattern. The Modify Pattern screen appears (refer to Figure 20).