Filter
Top Products
34 C1696M-A (7/08)
CHANGING THE PLAYBACK SPEED FOR RECORDED VIDEO
While playing back recorded video, you can play the video at several speeds in either a fast-forward or fast-reverse direction.
To change the playback speed for recorded video:
1. Select a video pane that is playing back recorded video (yellow border). Refer to Figure 31.
2. Press > or . (period) to play the video fast-forward. Press the Shift key while repeatedly pressing > or . (period) to play the video faster. [Or,
turn the Shuttle (outer ring) clockwise to play the video fast-forward. The farther you turn the Shuttle (outer ring) , the faster the
video plays.]
Figure 31. Changing Playback Speed
3. Press < or , (comma) to play the video fast-reverse. Press the Shift key while repeatedly pressing < or , (comma) to play the video faster. [Or,
turn the Shuttle (outer ring) counterclockwise to play the video in fast-reverse. The farther you turn the Shuttle (outer ring) , the
faster the video plays. During the desired speed, you can also press Enter/Shift
to retain the speed setting and release the
Shuttle (outer ring) .]
NOTE: You can play the video at 2x, 4x, 15x, 60x, or 300x faster than normal speed for video fast-forward and video fast-reverse. The selected
playback speed and direction appear in the upper-right corner of the video pane.
4. Release the Shuttle (outer ring)
to return to the normal forward speed.
5. Press the “L” key [or press the “Go to live” function button] to return to live view mode.
LOCKING AND UNLOCKING A VIDEO CLIP
You can lock an entire video clip from the Enhanced Search screen. You can also lock a portion of a clip from the Quick Search screen. Locking
video clips protects them from being erased when the hard disk is overwritten. A locked video clip remains on the hard disk until:
• The video clip is unlocked.
• Locked video clips are marked for deletion after a certain number of days (set in Recording > Storage > Privacy Settings).
Your system must be configured to delete locked video or it will remain on the hard disk until you unlock it. Contact your system administrator if
you need to enable this setting.
To lock a video clip from a quick search:
1. Perform a quick search (refer to Performing a Quick Search on page 29).
2. Click in the time line [or turn the Jog (inner dial)
to select the start of the locked clip], and then select Lock. This marks the start of the
locked clip. An information bar appears indicating the start time and date.