Filter
Top Products
26 C1696M-A (7/08)
Figure 20. Selecting a Pattern
3. Enter the pattern number you want to modify, and then click OK.
4. Use PTZ controls to move the camera through the pattern of movements you want to record.
5. Right-click in the video pane, and then click Record Pattern > End Record.
Running a Pattern
To run a PTZ pattern using a keyboard/mouse or DVR5100 control pad:
1. From the Main menu, click Actions. [Or, navigate to Actions, and then press Enter/Shift .]
The Actions menu appears.
2. From the Actions menu, click PTZ Operations. [Or, navigate to PTZ Operations, and then press Enter/Shift .]
The PTZ Operations dialog box appears (refer to Figure 21).
Figure 21. PTZ Operations Dialog Box
3. Click in the text field, and then type a pattern number.
[Or, navigate to the text field, and then press Plus or Minus until the pattern number appears.]
4. Click Patterns [or press the blue function button ]. The pattern starts.
5. To exit the dialog box without activating the pattern, click Close [or press the red function button .]