Filter
Top Products
C2910M-A (4/05) 25
Manual Gamma
Use this slider to either increase or decrease the amount of gamma correction. Move the slider from 25 to 100. The default depends on the
selected profile (refer to Table K).
Saturation
Use this slider to either increase or decrease the amount of color in an image. Move the slider from -8 to 8. The default depends on the selected
profile (refer to Table K).
GAIN CONTROL
The CCC5100H Series camera offers both automatic gain control (AGC) and manual gain control. The gain
control settings indicate how much to adjust camera images in relation to light levels. Most scenes
benefit from gain control operation.
Automatic (AGC)
Select ON to adjust the image automatically. The camera uses the BRIGHTNESS and DARK LIMIT settings
to compensate for changes in light levels.
Select OFF to adjust the image to compensate for light level changes according to the MANUAL GAIN
setting.
The default is ON.
Brightness
Use this slider to apply an offset to the automatic gain level. Increase it to lighten the camera image; decrease it to darken the camera image.
Move the slider from -18 to 18. The default depends on the selected profile (refer to Table K).
The BRIGHTNESS setting is active only if AUTOMATIC (AGC) is set to ON.
Dark Limit
Use this slider to set the lowest light level at which gain control will function. That is, set the maximum amount of gain for this camera. Move the
slider from 0 to 44. The default depends on the selected profile (refer to Table K).
The DARK LIMIT setting is active only if AUTOMATIC (AGC) is set to ON.
Manual Gain
Use this slider to set the gain value manually. Increase it to lighten the camera image; decrease it to darken the camera image. Move the slider
from -34 to 60. The default is 0.
The MANUAL GAIN setting is active only if AUTOMATIC (AGC) is set to OFF.
SHARPNESS
Use this menu to adjust how the camera will artificially add crispness to the image.
Overall
Use this slider to increase or decrease the image sharpness both horizontally and vertically. Move the
slider from -8 to 8. The default is 0.
Aperture
Use this slider to increase or decrease the image sharpness vertically. Move the slider from -8 to 8.
The default depends on the selected profile (refer to Table K).
Detail Boost
Select ON to boost the image sharpness under bright light conditions. The default is OFF.
NOTE: The AGC option also appears on the AUTO IRIS menu. When you change the AGC setting on one menu, the AGC setting on the
other menu also changes.
NOTE: Adding sharpness to the image also adds video noise, which may affect performance when
used with motion detection.
AUTOMATIC (AGC)
BRIGHTNESS
ON
-18 18
DARK LIMIT
0 44
MANUAL GAIN
-34 60
BACK
EXIT
GAIN CONTROL
|-----+-----|
|-----+-----|
|-----+-----|
OVERALL
-8 8
APERTURE
DETAIL BOOST
BACK
EXIT
ON
SHARPNESS
|-----+-----|
|-----+-----|
-8 8