Filter
Top Products
26 C2950M-E (8/10)
RESTORING ALL CAMERA DEFAULTS
1. Click the System tab.
2. Select General Settings from the drop-down menu.
3. Click the Restore All Camera Defaults button to restore the camera’s factory default settings.
NOTE: If the camera is not connected to a Dynamic Host Configuration Protocol (DHCP) network, the IP address settings for the camera will be
lost and the server will not recognize the camera. DHCP On is the default setting for the camera IP address.
Refer to the following section for more information:
• Turning Off DHCP on page 28
WARNING: This process cannot be undone; all user and custom settings will be lost.