Filter
Top Products
C2950M-E (8/10) 9
PRODUCT LABEL
The product label lists the model number, date code, serial number, and Media Access Control (MAC) address. This information might be required
for setup. To access the product label remove the back cover of the camera (refer to Figure 2 and Figure 3).
Figure 2. Remove Back Cover
Figure 3. Product Label
~í
Auto Iris Lens Connector: Controls the amount of light allowed through the lens. Insert the 4-pin connector from the DC drive auto iris
lens into this connector
~â
Auto Back Focus Button: Sets the auto back focus mechanism. Press the button once to center the auto back focus mechanism and to
fully open the iris. Press and hold the button for three seconds to start the auto back focus mechanism and to focus the camera.
~ä
NTSC/PAL Button: Toggles the service port between NTSC and PAL formats.
DC01234 SN:123-4567
00:15:C5:3A:84:DB
IX30-C3 A1.0
US
LISTED
C
N15007
AMPS
390mA
MAX
VOLTS
24V~
ITE
15KT