Pelco C2950M-E Digital Camera User Manual


 
C2950M-E (8/10) 71
IX30 SERIES
MODELS
IX30C 3.1 megapixel network color camera
IX30DN 3.1 megapixel network day/night camera
GENERAL
Imaging Device 1/3-inch (effective)
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution 2048 x 1536
Signal-to-Noise Ratio 50 dB
Auto Iris Lens Type DC drive
Electronic Shutter Range 1 ~ 1/100,000 sec
Wide Dynamic Range 60 dB
White Balance Range 2,000° to 10,000°K
Sensitivity f/1.2; 2,850°K; SNR >24dB
Color (33 ms) 0.50 lux
Color SENS (500 ms) 0.12 lux
Mono (33 ms) 0.25 lux
Mono SENS (500 ms) 0.03 lux
ELECTRICAL
Port RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Cabling Type Cat5 or better for 100Base-TX
Power Input 24 VAC or PoE (IEEE 802.3af class 3)
Power Consumption
(camera only) <6 W
Current Consumption
PoE <200 mA maximum
24 VAC <295 mA nominal; <390 mA maximum
Local Storage Mini SD
Alarm Input 10 VDC maximum, 5 mA maximum
Relay Output 12 VDC maximum, 150 mA maximum
Service Port External 3-connector, 2.5 mm provides NTSC/PAL video output
MECHANICAL
Lens Mount CS mount, adjustable
Camera Mount 0.25-inch (0.64 cm) UNC-20 screw, top and bottom of camera housing