Filter
Top Products
165
6
Settings
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Folder
Name].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23) to select [Standard]
or [Date].
5
Press the 4 button.
The setting is saved.
Set the device to which the camera is connected with the USB cable.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [USB
Connection].
3
Press the four-way controller (5).
A pull-down menu appears.
Changing the USB Connection Mode
Make sure to set the USB Connection mode before connecting your
camera to the computer or printer. You cannot perform the following
setting if your camera is connected to the computer or printer with the
USB/AV cable.
See “Connecting with Computers” in chapter 7 for instructions on
connecting the camera to a computer.
e_kb477.book Page 165 Thursday, November 20, 2008 4:21 PM