Pentax 17472 Digital Camera User Manual


 
169
6
Settings
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Auto Power
Off].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
turns off automatically.
Choose from [5min], [3min] or [Off].
5
Press the 4 button.
The setting is saved.
Power Saving does not function in the following situations:
- while taking pictures in Continuous Shooting mode
- in the playback mode
- while recording a movie
- while the camera is connected to a computer or printer
- when using the AC adapter
- while a menu is being displayed
When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec] is set.
Setting Auto Power Off
Setting
Power Saving
Auto Power Off
Off
3min
5min
Video Out
Reset
Brightness Level
2/3
MENU
Cancel
Cancel
Cancel
OK
OK
OK
OK
NTSC
Delete All
5sec
e_kb477.book Page 169 Thursday, November 20, 2008 4:21 PM