Filter
Top Products
168
6
Settings
4
Press the 3 button.
The camera returns to A mode or Q mode.
The display appears with the set brightness.
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Power
Saving].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the time until the camera
enters power saving mode.
Choose from [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
5
Press the 4 button.
The setting is saved.
Using the Power Saving Function
Setting
Power Saving
Auto Power Off
Video Out
Brightness Level
2/3
MENU
Cancel
Cancel
Cancel
OK
OK
OK
OK
2min
Off
5sec
30sec
1min
15sec
Delete All
Reset
e_kb477.book Page 168 Thursday, November 20, 2008 4:21 PM