Filter
Top Products
61
3
Taking Pictures
3
Press the shutter release button
halfway.
The focus frame (or face recognition frame)
on the display turns green when the camera
focuses on the subject at the correct
distance.
4
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display for two seconds (Instant Review)
and is saved to the SD Memory Card or the built-in memory.
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first
position. This locks the focus setting and the exposure. The green focus
frame lights on the display when the shutter release button is pressed
halfway and the subject is in focus. If the subject is out of focus, the
frame turns white.
• Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically (p.69).
• When the Pixel Track SR activates, the shake reduction goes in
process before the Instant Review of the image is displayed. Therefore
it will require few seconds to display the Instant Review.
Using the Shutter Release Button
14:25
14:25
14:25
38
38
38
02/02/2009
02/02/2009
1/250
1/250
F4.6
F4.6
AUTO
AUTO
e_kb477.book Page 61 Thursday, November 20, 2008 4:21 PM