Filter
Top Products
64
Taking Pictures
m
Press the OK button.
The screen for taking the first image appears in the left half
of the LCD monitor.
,
Take the first image.
Hold the camera so that the subject
is in the middle of the left half of the
screen and press the shutter release
button.The image is displayed in the
left half of the LCD monitor.The right
half of the screen is for taking the
second image.
.
Move the camera to the right with-
out changing your stance.
⁄0
Take the second image.
Make sure that the subject is in the
middle of the right half of the screen
and press the shutter release button.
• To cancel the 3D image mode change to another Capture
mode.
• A clear three-dimensional effect will not be achieved if the two
images are taken in widely different positions (heights) or are
not straight.When taking a person, you are recommended to
ask your model to stay as still as possible and to take the
second picture as quickly as you can. It is easier to take the
pictures if you use a tripod or appropriate base.
• As a guide, the camera should be moved about 1/40 of the
distance between the camera and the subject. For example, if
the subject is 3m away, the distance the camera should be
moved will be 3m÷40=7.5cm.
However, as the way people see three-dimensional images
differs from person to person, there is no need to be too con-
cerned. Refer to the table below for a simple guide to how far
to move the camera.
Distance to subject
Camera movement
0.1 m
0.5 cm
0.3 m
1 cm
0.5 m
1.5 cm
1 m
2.5 cm
3 m
7.5 cm
5 m
13 cm
memo
1414
11:1911:19
10/20/200310/20/2003
1414