Filter
Top Products
70
Taking Pictures
Using the Remote Control Unit (optional)
You can take pictures using the remote control F (optional).
z Press the four-way controller (̆) in
Capture mode to display ( ) on
the LCD monitor.
The self-timer lamp will blink and the
camera is ready to take pictures.
x
Press the shutter release button on
the remote control unit.
The self-timer lamp will blink rapidly and the picture will be
taken after approximately three seconds.
Playing Back Images
☞
p.79
• The buttons on the camera can be used in the same way.
• Please ensure that the remote control unit is no more than 4
meters away from the front of the camera.
• To take a picture immediately after pressing the shutter release
button on the remote control unit, press the four-way controller
in step z to display on the LCD monitor.
• You can use the remote control E (optional) to operate the
zoom.
b Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, con-
tact your nearest Pentax customer service center. (A charge is
made for changing the battery.)
198198
11:1911:19
10/20/200310/20/2003
memo
z