Filter
Top Products
103
Playback/Erasing
102
Playback/Erasing
Installing the software
The procedures for installing the necessary software are
explained.
Installing the USB driver (Only for Mac OS 8.6)
z Turn on your Macintosh.
x Set the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
c Copy the following 2 files to the [Extensions] folder
within the System folder.
PENTAX-USB Storage Driver
PENTAX-USB Storage Shim (E)
v Restart your Macintosh.
For MacOS 9.x or later, there is no need to install the USB driver.
Installing ACDSee
TM
When installing ACDSee
TM
, recorded images can be viewed on
your Macintosh.
z Turn on your Macintosh.
x Set the included CD-ROM (S-SW5) in the CD-ROM drive
of your Macintosh.
c Double click your language choice.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
v Follow the on-screen guidance and enter the registration
information and proceed with the installation.
memo
Viewing Images with Macintosh
By using the provided USB cable (I-USB6) or card reader and
image-browser software, you can transfer images recorded with
the camera to a PC and edit them or print them out.
This section explains how to view images on a PC using the pro-
vided USB driver and software.
About the included software
The included CD-ROM (S-SW5) contains the following software:
- USB driver
- Image viewing software (ACDSee™)
System environment
OS: Mac OS 8.6 or later (QuickTime 4.0 or later required)
CPU: Power PC 266MHz or higher
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
To view movie pictures on your Macintosh, QuickTime 4.0 or later
pre-installed on system is required.
When you connect the camera to your PC, you are recom-
mended to use the AC adapter. If the battery power runs out
while image data is being transferred, the data may be lost.
Caution
memo
e05KB335_33e.qk 6/6/02 4:28 PM Page 102 (1,1)