Filter
Top Products
Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC2 (optional) is recom-
mended.
z Make sure that the camera is turned off before opening
the terminal cover.
x Connect the DC terminal on the AC adapter to the DC
input terminal on the camera.
c Connect the AC plug cord to the AC adapter.
v Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off before connecting
or disconnecting the AC adapter.
• Make sure that the AC plug cord and connecting cord are
inserted securely. If the cord becomes disconnected while
you are taking pictures, the data may be lost.
• When using the AC adapter D-AC2, be sure to read the
operation manual accompanying the AC adapter.
Caution
13
Getting Started
12
Getting Started
● Approximate Operating Time (when fully charged)
Number of recordable images:Approx. 250 (with the flash fired for
50% of the shots. LCD monitor ON)
Playback time :Approx. 150 min.
* The above table is based on Pentax measuring conditions and may vary
depending on capture mode and shooting conditions.
Performance of the battery may deteriorate in low tempera-
tures.
● Battery Level Indicator
You can check the battery level by the symbol displayed on
the LCD monitor.
(lit green) : Adequate power remains.
↓
(lit green) : Battery is running low.
↓
(lit yellow) : Battery is running very low.
↓
(lit red) : Battery is exhausted.
↓
[Battery depleted.] : After the message is displayed,
the camera will turn off.
Caution
z Terminal cover
AC adapter
To Power outlet
c
x
e01KB335_33e.qk 6/6/02 4:30 PM Page 12 (1,1)