Filter
Top Products
Installation Procedure
1. Unpack the package and verify that all the items listed in the Chapter 2 are available.
2. Connect the IP Camera to your network with the attached network cable; please connect
the IP camera to your network switch or router.
3. Connect the power adapter to IP Camera and plug the power adapter to power outlet. The
IP Camera will be powered on. When the IP Camera is ready, the Power LED will light on.
4. Make sure that you have installed the ActiveX utility.
Note: It is highly recommended to use the power adapter shipped with the IP Camera, do
NOT use any other power adapter from other sources. It may make the IP Camera damage.
6