Filter
Top Products
Web Port The IP Camera support web connection, the default web port is
80. If you change the web port from 80 to other port, such as
8080, you must type http://192.168.0.20:8080 to connect the
camera through the web browser.
Apply When you finish the “LAN” configuration, click “Apply” to apply the
setting.
PPPoE
Enable PPPoE Enable or disable PPPoE function of the IP Camera.
User Name Enter the User Name for the PPPoE account.
Password Enter the Password for the PPPoE account.
MTU Maximum Transmission Unit (MTU) is the largest frame that
could be transmitted through the PPPoE connection. The MTU is
specified in octets (eight-bit bytes). If there is no other request,
please leave it as default value.
Apply
When you finish the “PPPoE” configuration, click “Apply” to apply
the setting.
Dynamic DNS
Enable DDNS Enable or disable DDNS function of the camera.
Provider Several companies provide DDNS service. The IP Camera
supports the service from DynDNS company.
Domain Name The domain name given by DynDNS is
“registername.dyndns.com”. Enter the domain name that you
register for the camera from DynDNS web site.
User Name Enter the login name for the DDNS service.
Password Enter the password for the DDNS service.
Apply
When you finish the “Dynamic DNS” configuration, click “Apply” to
apply the setting.
UPnP
Enable UPNP Enable or disable UPnP function of the camera.
Apply
When you finish the “UPnP” configuration, click “Apply” to apply
the setting.
58