Planet Technology ICA-107P Digital Camera User Manual


 
SSID The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of two co-located WLANs.
You may specify a SSID for the IP Camera and then only the
device with the same SSID can interconnect to the IP Camera.
Channel This setting is only available for Ad Hoc mode. Select the number
of the radio channel used for the networking.
Basic Rate The IP Camera will force to the data rate that you selected to
transmit data.
Authentication and
Encryption Type
Choose the security setting of your wireless network.
The ICA-107W supports: “None”, “Open System”, “Shared Key”
and “WPA-PSK”. When you select “WPA-PSK” authentication,
you can encryption your wireless with WPA-TKIP or WPA-AES.
WPA Pre-Shared Key The WPA-PSK key can be from 8 to 64 characters and can be
letters or numbers. This same key must be used on all of the
node in the wireless network.
WEP Key Length You may select 64-bit or 128-bit to encrypt transmitted data.
Larger key length will provide higher level of security, but the
throughput will be lower.
WEP Key Format Hexdecimal – Only “A-F“, “a-f“ and “0-9“ are allowed to be set as
WEP key.
ASCII – Numerical values, characters or signs are allowed to be
WEP key. It is more recognizable for user.
Default Key Select one of the keys (1~4) as the encryption key.
Key1 ~ Key4 Enter the WEP key you want to use here.
Apply When you finish “WLAN” configuration, click this button to apply
the setting.
60