Filter
Top Products
10. Appendix A Router/Gateway Setup for Internet
Viewing
To view IP Camera across the Internet, you have to make sure Router/Gateway has
configured to pass incoming TCP/UDP connections from remote PC to the IP Camera. The
Router/Gateway should set port forwarding or virtual server for the connections. Please see
the
illustration as below.
Router/Gateway Port Forwarding/Virtual Server Setup
Name Protocol Port LAN IP
Setup 1 TCP 80 192.168.0.20
Setup 2 TCP 4321 192.168.0.20
Port Definition
Setup 1 It is the port of Web port. You have to configure the protocol to
“TCP”.
Setup 2 It is the port of Video port. You have to configure the protocol to
“TCP”.
Viewing Internet Camera via Web Browser
Setup 1/Setup 2 If you want to view the video via Web Browser from Internet, you
have to ensure the Router/Gateway has configured both setup1
and setup 2. If the web port is not default port “80”, but changed
to 8080. The remote user has to enter http://210.66.155.85:8080.
Without Setup 2, you will not see the video streaming in this PC.
Viewing Internet Camera via Camera Viewer Utility
Setup 2
If you want to use IP Camera Viewer Utility to view the camera
from Internet, please make sure the Router/Gateway has
70