Filter
Top Products
8.6. System
The “System” allows users to setup the IP Camera’s parameters, like camera name, data/time
setting. And also provide firmware upgrade and reset tools at this page.
(Example on ICA-107W)
System
Camera Name The default camera name is “ICA-107(W / P)”. It is recommended
to name a meaningful name for the IP Camera.
Password
Enter the password for the default account. The password should
be 4 digits.
Confirm Password
Enter the password again to confirm the setting.
Set Date/Time manually
and Synchronize to PC
time
You can set the IP Camera’s Date/Time manually. Or you can
just click on the Synchronize to PC time to let the IP Camera
synchronize its time to your PC automatically.
NTP Server (Radio Box) To enable the NTP function.
Time Zone Select the time zone where your camera is located.
NTP Server Specify the IP Address of the NTP Server here.
64