Filter
Top Products
Function Notification
The page of user setting is very closely related to the IP filter settings. While the
administrators are setting these two pages, they should notice that login authorities
are not only based on the login names but also the range of IP addresses.
Administrators could reject login users according to both login names and IP
addresses. The administrator accounts have the supreme power; system will always
accept no matter how IP filter setting was set.
Several examples to explain the logical relations between login names and the IP
policy:
-1-.
User page: Login name 1= 12345, Password=12345, Access Authority=any
IP filter page: Default Policy=Allow, login name1 comes from 192.168.0.A to B=Allow
Result: when the remote users login in the name of 12345 and come from the IP
addresses 192.168.0.A to 192.168.0.B, login will be successful. If these users did not
come from the IP addresses A to B, login access will be rejected.
-2-.
User page: Login name 1= 12345, Password=12345, Access Authority=any
IP filter page: Default Policy=Allow, login name1 comes from 192.168.0.A to B=Deny
Result: when the remote users login in the name of 12345 and come from the IP
addresses 192.168.0.A to 192.168.0.B, login will be denied. If these users did not
come from the IP addresses A to B, login access will be successful.
-3-.
(User page: Login name 1= 12345, Password=12345, Access Authority=any
IP filter page: Default Policy=Deny, login name1 comes from 192.168.0.A to B=Deny/
Allow
Result: login of all the login names will be rejected except the login name “admin”.
Application Setting
Parameters in the Basic configuration menu provide machine adjustment; the
available configurations are listed below:
Icon Menu Link Definition
FTP Client
Setup IVS-100 as a FTP client and configure
Server site in order to upload images to server
SMTP
Setup Mail transferring service configuration
Alarm 1
Setup Alarm Output 1 action via manual or
event
31