The following lists describe for each setting:
• IP: IP address of the camera.
• Port: Connection port of the camera. The default is 80.
• Login ID: Please input the login ID if you enable authentication function of the
specific camera.
• Password: Please input the password if you enable authentication function of the
specific camera.
• Video Path: A directory to store recorded video files. Double-click the input field or
click the square button to select the directory.
• Video Frame Rate: frame rate of video.
• Video Number of Frame: The maximum number of images are saved in a video
file. If the value is larger, then few files will get. If the value is smaller, then more
files will get.
• Snapshot Path: A directory to store snapshots. Double-click the input field or click
the square button to select the directory.
• Motion Rec Interval[Sec]: If Motion Detection is enabled, then when Motion
Detection starts, CamView will do recording for the specified duration. Minimum
unit is second.
Figure 5.3.2 The Camera Tab
•
Auto Recording: If the box is checked, the program will do recording for the
specified camera automatically at the beginning of CamView starts.
•
Motion Detection: Check this option will enable Motion Detection in CamView.
56