Filter
Top Products
5.3.3. Scheduling
As shown in Figure 5.3.3, users can schedule recording.
When you press the Add button, the editing task will be added to the Schedule Items
column.
When the Modify button is pressed, the new schedule recording will be updated to the
specified item.
If the Remove button is pressed, the specified task will be removed from the list.
Note: The Apply button is unused for this tab; always confirm the settings by
pressing the OK button to let configurations take effect.
The following lists describe for each setting:
• Hour: Set the hour of time in 24- hour clock format. * stands for all hours.
• Minute: Set the minute of time. * stands for all minutes.
• Month: Set the month for recording tasks. * stands for all months.
• Day: Set the day for recording tasks. * stands for all days.
• Weekday: Set the specific weekday of a week. If no day is specified, All
weekdays will fit.
• Duration (Sec): The duration in seconds for the schedule recording. 0 (zero)
means no limit.
For example, set a recording task which begins at 10:00 every Monday with duration
3600 seconds. The configuration is like below:
Hour = 10, Minute = 0, Month = *, Day = *, Weekday = Mon, Duration = 3600
Figure 5.3.3 The Scheduling Tab
57